Kazakhstan product certification: EAC, GOST-K and GGTN, which document do you need and when?

In short
Kazakhstan product certification means an EAC certificate or EAC declaration when your product falls under a Eurasian Economic Union (EAEU) technical regulation; in that case no separate GOST-K is needed. Hazardous equipment such as boilers above 0.07 MPa also needs a GGTN permit for use if it has not gone through conformity certification.
- If your product falls under an EAEU technical regulation, an EAC document lets you sell it in every EAEU country, Kazakhstan included; no separate GOST-K is needed.
- You cannot choose between a certificate and a declaration; the EAEU technical regulation covering the product decides.
- Hazardous technical devices that have passed conformity certification, and their parts and spare parts, do not need a GGTN permit for use.
- Kazakhstan does not allow certificates that are missing from the register. Separately, in May 2026 its Ministry of Trade and Integration announced it had invalidated a large number of EAEU certificates and declarations found to be fake or n
In this article
- Which Kazakhstan product certification applies in which case?
- What is an EAC document? Certificate versus declaration
- What is GOST-K, and do you still need it when you have EAC?
- Which products need GGTN (the permit for use of hazardous technical devices)?
- Identify the right document for your product in 3 steps
- Commercial and transport papers customs asks for alongside the certificates
- Who applies, and how do you check that a document is valid?
- Special cases: products outside the Eurasian list and the general safety declaration
- Comparison table: EAC, GOST-K and GGTN
Kazakhstan product certification is an EAC certificate or an EAC declaration (EAC being the Eurasian conformity mark) whenever your product falls under a Eurasian Economic Union (EAEU) technical regulation [1]. With that document the product moves freely across every EAEU country, Kazakhstan included [1]. The national certificate the industry calls GOST-K comes into play for products with no EAEU regulation and in areas that are still national, such as fire protection and metrology [1].
GGTN (the permit for use of hazardous technical devices) is a third type. It allows hazardous devices such as steam boilers, pressure vessels, cranes or lifts to be used in Kazakhstan [2].
If your buyer has asked you for one of these three, start by checking which group your product belongs to. Throughout this article we will follow a machinery manufacturer in Kayseri, Turkey. It sells a steam boiler and an industrial electric fan to its distributor in Almaty. Both products travel on the same truck, but they do not need the same documents.
Which Kazakhstan product certification applies in which case?
Your product's situation decides the document. A product under an EAEU technical regulation needs EAC, and a product outside one follows Kazakhstan's national rules. A hazardous technical device may also need a permit for use [3][2][4].
Your product's situation | Required document |
|---|---|
Covered by an EAEU technical regulation | The EAC certificate or EAC declaration that regulation prescribes [4] |
Not on the EAEU Unified List, or listed but its regulation is not in force | |
In fire protection or metrology | National certification [1] |
Hazardous technical device (boiler above 0.07 MPa, pressure vessel, crane, lift) | GGTN permit for use if it has no conformity certificate (e.g. an uncertified boiler) [2] |
Part or spare part of a hazardous device | No GGTN needed [2] |
The Unified List is the list of products subject to mandatory requirements within the Customs Union, approved by a decision of the Customs Union Commission [3].
Whichever row you land in, customs will also want the sales contract, invoice and transport document alongside this document [6].
What is an EAC document? Certificate versus declaration
An EAC document shows that your product meets the safety requirements of EAEU technical regulations; a product found compliant carries the EAC mark [1]. The EAEU members are Russia, Kazakhstan, Belarus, Armenia and Kyrgyzstan. Member states switched to EAC documents on 15 March 2015 [1].
Conformity is shown in three ways: EAC certificate, EAC declaration or registration [1]. According to the Eurasian Economic Commission, mandatory confirmation of conformity takes the form of a declaration or a certificate, only in the cases the relevant EAEU technical regulation provides for and only under that regulation's requirements [4]. Which document form applies, and under which scheme, is written into the regulation itself [4].
You cannot choose between a certificate and a declaration. If the regulation covering your product prescribes a declaration, you get a declaration; if it prescribes a certificate, you get a certificate.
The difference lies in who issues the document:
An EAC certificate is issued by a certification body. The work runs under a contract with that body, and the certificate holder is the applicant [3].
An EAC declaration is issued by the manufacturer, importer or authorised representative itself. The manufacturer can do the testing, and in some cases a laboratory does it [1].
A declaration does not stay on paper either. The EAEU keeps a unified register of issued certificates and registered declarations [4].
Example: Say the Kayseri manufacturer's fan falls under an EAEU regulation that prescribes a declaration scheme. The declaration is issued by the Almaty distributor or by the manufacturer's authorised representative registered in the EAEU; the manufacturer prepares the test reports and technical file. Had the regulation prescribed a certificate, the same fan would go to a certification body. Saying "a declaration is easier, let's get that" is not in your hands.
What is GOST-K, and do you still need it when you have EAC?
If your product falls under an EAEU technical regulation, you do not need a separate GOST-K on top of EAC. Kazakhstan's law on technical regulation says that where an international treaty ratified by the country sets a different rule, the treaty applies [3]. For products under an EAEU regulation, the rule is the EAEU's, and a product confirmed with EAC can be sold in every member state [1].
GOST-K is the industry's name for the conformity certificate issued within Kazakhstan's national system. The law defines a certificate of conformity as a document showing that a product complies with technical regulations or standardisation documents [3].
The national document comes up in two cases. The first is assessing products not yet covered by an EAEU technical regulation against the member state's national standards and technical rules. The second is that certification in fire protection and metrology still follows national rules [1]. If your product is in the fire protection area, certification may follow Kazakhstan's national rules. In that case EAC alone may not be enough and you need a Kazakhstan fire safety certificate. First check whether your product falls under an EAEU regulation.
When your buyer asks for GOST-K on a product that already has EAC, ask in writing on what grounds. For example: "Under which law or regulation do you require GOST-K for this product?" If the product is under an EAEU regulation, the legal basis is EAC. If the product sits in the national area, the request is justified and you need the document from the national system.
The fan in our example fits the first case. If the fan falls under an EAEU regulation, an EAC declaration or certificate is enough and GOST-K is not requested on top.
Which products need GGTN (the permit for use of hazardous technical devices)?
GGTN is the permit for use that Kazakhstan's authority responsible for industrial safety grants for technologies used at hazardous production facilities and for hazardous technical devices [2]. The authority reviews the application documents and either issues the permit or sends a reasoned refusal [2].
The main groups the law counts as hazardous technical devices are [2]:
Steam and hot water boilers operating at pressures above 0.07 MPa or water temperatures above 115 °C [2]
Pressure vessels operating at pressures above 0.07 MPa [2]
Load lifting cranes, lifting platforms, escalators, lifts, moving walkways, funiculars and lifts for people with disabilities [2]
Drilling and well repair units for wells deeper than 200 metres, and mine hoisting installations [2]
If the working pressure on your boiler's rating plate exceeds that limit, this section concerns you.
Not every hazardous device needs the permit. Hazardous technical devices that have passed conformity assessment (certification) do not need one [2]. Nor is a permit required for the units, parts, tools, components and spare parts inside the device [2]. So if your boiler has a certificate under the EAEU or national system, the GGTN question is closed, and spare part shipments need no permit either.
A permit, once granted, is valid across all of Kazakhstan for every market participant and does not have to be obtained again [2]. Sell the same boiler model to a second buyer and you do not start the permit over. If the device turns out not to meet industrial safety requirements in use, the authority withdraws the permit [2].
The permit is obtained as a Kazakh e-government service through the elicense.kz portal. You log in or register, choose the service, fill in the application form, sign it with an electronic signature (Russian: ЭЦП) and track the result on the portal [7]. Without a Kazakh electronic signature, plan the application together with your buyer or representative. We cover the process in detail on our Kazakhstan GGTN permit for use page.
The steam boiler in our example is a hazardous technical device if it operates above 0.07 MPa [2]. If the boiler has a conformity certificate, no permit is needed; if not, the permit is obtained from elicense.kz [2][7]. If the boiler arrives with only an EAC declaration, confirm with the competent authority whether a permit is needed, because the law ties the exemption to certification [2].
Identify the right document for your product in 3 steps
Ask three questions in order. Let's run each one on the Kayseri manufacturer's two products.
The first question is whether the product falls under an EAEU technical regulation. Check the EAEU Unified List and technical regulations by the product's name, use and customs tariff heading. If it does and the regulation is in force, that regulation sets the document form: EAC certificate or EAC declaration [4]. In our example we assume both the fan and the boiler fall under a regulation.
If the product falls under no regulation, you turn to national rules. If it is not on the Unified List, or is listed but its regulation has not entered into force, national rules apply and an optional general safety declaration can be issued [3][5]. In fire protection or metrology, national certification is required [1]. Neither of our products stops here.
The last question is for heavy equipment. Does the pressure exceed 0.07 MPa or the water temperature 115 °C, or is the product in the crane or lift group [2]? The fan is not in this group. If the boiler is, check for an EAC certificate: with one, no permit is needed; without one, the permit comes from elicense.kz [2][7].
Here is how the Kayseri manufacturer's two products pass through these steps:
Step | Industrial electric fan | Steam boiler (above 0.07 MPa) |
|---|---|---|
1. EAEU regulation | Say it is covered: EAC declaration or certificate | Say it is covered: EAC declaration or certificate |
2. National rule | Not needed | Not needed |
3. Hazardous device | No | Yes; no permit needed with an EAC certificate, ask the authority if there is only a declaration, GGTN if not certified |
The fan's job ends at step one; for the boiler, whether it is certified only becomes clear at step three.
Commercial and transport papers customs asks for alongside the certificates
The documents that support the information in the customs declaration are listed in Article 108 of the EAEU Customs Code [6]:
Sales contract, commercial invoice and other commercial documents showing ownership or the right to use the goods
Transport documents (a CMR consignment note by road, a bill of lading by sea)
A document showing the authority of the person filing the declaration
Documents showing compliance with prohibitions and restrictions
Documents of origin
Documents showing the product features used for its customs tariff classification
Documents showing payment of customs duties and the declared customs value
The article does not name EAC [6]. If your product is subject to mandatory conformity confirmation, the EAC certificate or declaration is submitted among the documents of "compliance with prohibitions and restrictions" on this list. GGTN, by contrast, is a permit to use the device in Kazakhstan [2]; ask your buyer's customs broker whether customs asks for it.
Your Kazakh buyer pays the tax, but knowing it helps when you talk price. Kazakhstan has applied 16% import VAT since 2026, and the tax base includes customs value, customs duty and other charges [1]. Customs duty on most goods is between 0% and 20% of customs value, rising to as much as 80% for some product groups [1].
When the Kayseri manufacturer sends both products in one shipment, the file holds the contract and invoice, the CMR, the certificate of origin and the EAC documents for both products.
Who applies, and how do you check that a document is valid?
The application is made by a company or sole proprietor registered in Kazakhstan or another EAEU country: the manufacturer, importer, the manufacturer's authorised representative or the seller [3]. A manufacturer in Turkey cannot apply in its own name. An authorised representative is the person who, under a contract with the foreign manufacturer, acts on its behalf in conformity assessment and in placing the product on the market [3]. In practice, either your buyer applies as importer or you sign a contract with a representative in the EAEU.
The register tells you whether a document is valid. When a product subject to mandatory conformity confirmation is placed on the market in Kazakhstan, a certificate whose details are not in Kazakhstan's technical regulation register or the EAEU unified registers cannot be used [3]. However tidy it looks, a certificate with no register entry cannot be used to place the product on the Kazakh market.
Kazakhstan checks documents closely. According to its Ministry of Trade and Integration, the country declared invalid a large number of certificates and declarations of conformity issued in EAEU countries that inspections found to be fake or non-compliant [8]. Of these, 742 had been issued in Kyrgyzstan, 244 in Russia and 11 in Belarus [8]. After the inspections, 8 certification bodies lost their accreditation and were removed from the EAEU unified register [8].
When a document is handed to you, check three things:
Is it recorded under its number in the EAEU unified register or Kazakhstan's register?
Do the product name, manufacturer and validity date in the register match the document you hold?
Is the issuing body's accreditation still listed in the register?
If any of the three fails, have the document reissued before shipping. A document found invalid at customs holds up the entire shipment.
Special cases: products outside the Eurasian list and the general safety declaration
For products not on the EAEU Unified List, or listed but with a technical regulation not yet adopted or not in force, Kazakhstan provides for a general safety declaration [3][5]. This declaration is optional; the manufacturer, authorised representative, importer or seller issues it [5].
For these products, ensuring safety is the responsibility of whoever places them on the market. Voluntarily applying Kazakhstan's relevant national standards counts as sufficient for safety [5].
The declaration is prepared in Kazakhstan's digital technical regulation system using the form annexed to the ministerial order. The authority sends a notification and records the declaration in the system within 3 calendar days; this provision took its current wording in an amendment in force since 12.07.2026 [5]. The products eligible for a declaration are listed in the order's annex, and the first line covers all kinds of watches and clocks and their parts [5].
If your product falls into this group, check whether this declaration is enough before looking for a mandatory EAC or national certificate. Review the list and agree with your buyer in whose name the declaration will be issued.
Comparison table: EAC, GOST-K and GGTN
EAC (certificate or declaration) | GOST-K (national certificate) | GGTN (permit for use) | |
|---|---|---|---|
What it shows | Conformity with an EAEU technical regulation [1] | Conformity with technical regulations or standardisation documents [3] | That a hazardous technical device may be used [2] |
Which products | Products under an EAEU regulation [4] | Products with no EAEU regulation; fire protection, metrology [1] | Listed hazardous technical devices without certification [2] |
Who issues it | Certificate by a certification body; declaration by manufacturer, importer or representative [1] | Certification body in the national system [3] | Authority responsible for industrial safety [2] |
Who applies | Manufacturer, importer, representative or seller registered in Kazakhstan or the EAEU [3] | Applicant registered in Kazakhstan or the EAEU [3] | Via elicense.kz, with an electronic signature [7] |
Where valid | All EAEU countries [1] | Kazakhstan | All of Kazakhstan, for all market participants [2] |
Where to check | EAEU unified register [4] | Kazakhstan technical regulation register [3] | elicense.kz application result [7] |
Your task this week is to write down, in one list, which EAEU technical regulation each product you sell falls under, or which national rule applies if none does, and share it with your buyer. For pressure products such as boilers, add the certification status to that list. If after the three steps your product ends up outside EAEU regulations or in a national area such as fire protection, you can see how the national document is obtained on the Kazakhstan GOST-K certificate page.
This article is not legal or financial advice. Rules may change; before shipping, check your product's document in the EAEU unified register and the law text on adilet.zan.kz, the portal of Kazakhstan's Ministry of Justice.
Last reviewed: 16.11.2026
Get a quote for Kazakhstan GOST-K certificate
Share your product information and we will determine together which document is required.
Get a QuoteFrequently asked questions
What is the Kazakhstan fire safety certificate?
It is the conformity document obtained under Kazakhstan's national system for fire protection products. Certification in this area may still follow Kazakhstan's national rules; if your product does not fall under an EAEU regulation, an EAC document alone may not be enough.
Sources
- Kazakistan Pazar Bilgileri (2026)
- Kazakistan Sivil Koruma Hakkında Kanun No. 188-V (Adilet)
- Kazakistan Teknik Düzenleme Hakkında Kanun No. 396-VI (Adilet)
- Uygunluk değerlendirmesi sayfası
- Kazakistan Ticaret ve Entegrasyon Bakanlığı Emri No. 380-НҚ: Birleşik Liste dışındaki ürünler ve genel güvenlik beyanı
- Avrasya Ekonomik Birliği, Gümrük Kodu Antlaşması (2017)
- Kazakistan e-Devlet (gov.kz), Tehlikeli teknik cihaz kullanım izni hizmet sayfası
- Economist.kg: Kazakistan 1,1 bin AEB sertifikasını iptal etti




